Pakka Bigha to Square Feet in Rajasthan: Formula & Examples
Under the commonly cited 165-foot × 165-foot Shahjahani Jarib measurement, one bigha equals 27,225 square feet. This is a useful conversion example for people researching pakka bigha to square feet in Rajasthan. However, bigha measurements can vary by locality and historical land-measurement system, so do not assume that this figure applies to every village or land record in Rajasthan.
Before using the conversion for a land purchase, sale, partition or legal document, confirm the applicable measurement standard with the local revenue authority.
Table of Contents
- What is a pakka bigha?
- Pakka bigha to square feet formula
- Conversion table
- Worked examples
- Pakka bigha vs kachha bigha
- How to verify the correct measurement
- Common mistakes
- Frequently asked questions
What Is a Pakka Bigha?
A bigha is a traditional unit of land area used in several parts of India. The term “pakka bigha” is commonly used to distinguish a larger or locally defined bigha measurement from another traditional measurement, such as a kachha bigha.
One commonly cited Rajasthan measurement standard is the Shahjahani Jarib, using a length of 165 feet. When the bigha is calculated as a square measuring 165 feet on each side, its area is:
165 feet × 165 feet = 27,225 square feet.
The Government of India’s land-area unit standards list the Shahjahani Jarib example as 165 feet × 165 feet, equal to 27,225 square feet. Rajasthan’s land-record rules also show that land measures have differed across areas and historical integrating units. Therefore, the term “pakka bigha” alone may not be enough to establish the area of a specific parcel.
Pakka Bigha to Square Feet Conversion Formula
For the specific 165-foot × 165-foot measurement example, use this formula:
Area in square feet = Number of bighas × 27,225
This formula is appropriate only where the stated measurement standard applies.
How the calculation works
- Take the length of one side: 165 feet.
- Take the other side: 165 feet.
- Multiply the two measurements: 165 × 165.
- The result is 27,225 square feet.
Therefore, under this example:
1 bigha = 27,225 square feet
This should be treated as a defined measurement example, not a universal conversion guarantee for every location in Rajasthan.
Pakka Bigha to Square Feet Conversion Table
The following table uses 27,225 square feet per bigha.
| Bigha | Area in square feet |
|---|---|
| 0.25 | 6,806.25 |
| 0.5 | 13,612.5 |
| 1 | 27,225 |
| 2 | 54,450 |
| 3 | 81,675 |
| 4 | 108,900 |
| 5 | 136,125 |
| 10 | 272,250 |
| 20 | 544,500 |
Important: These figures are mathematical results based on the 27,225-square-foot example. Check the applicable local land-measurement convention before using them for a real property.
Worked Examples: How to Convert Bigha into Square Feet
Example 1: Convert 2 bighas into square feet
Assuming the 165-foot measurement standard applies:
2 × 27,225 = 54,450 square feet.
Result: 2 bighas = 54,450 square feet.
Example 2: Convert 5 bighas into square feet
5 × 27,225 = 136,125 square feet.
Result: 5 bighas = 136,125 square feet.
Example 3: Convert 10 bighas into square feet
10 × 27,225 = 272,250 square feet.
Result: 10 bighas = 272,250 square feet.
Example 4: Convert 13,612.5 square feet into bigha
To convert square feet back into bigha under the same measurement standard, divide by 27,225.
13,612.5 ÷ 27,225 = 0.5 bigha.
Result: 13,612.5 square feet = 0.5 bigha, under this example.
Difference Between Pakka Bigha and Kachha Bigha
Pakka and kachha bigha can refer to different traditional measurement conventions. Their exact areas should not be assumed to be identical throughout Rajasthan.
For illustration, the following two commonly cited square measurements produce different areas:
| Measurement example | Calculation | Area |
|---|---|---|
| 165-foot square | 165 × 165 | 27,225 sq ft |
| 132-foot square | 132 × 132 | 17,424 sq ft |
These dimensions are examples of different jarib-based measurements. They should not be taken as proof that every local “pakka bigha” equals the first figure or every “kachha bigha” equals the second.
If a seller, broker or land document mentions bigha without stating the measurement standard, confirm the local convention before comparing prices or calculating the plot area.
How to Verify the Correct Bigha Measurement in Rajasthan
Use the following steps before relying on a conversion.
1. Identify the exact revenue village
Note the district, tehsil and village where the land is situated. Traditional measurement systems may differ by locality and historical settlement.
2. Review the land records
Check the relevant Jamabandi, Khasra details and available settlement records. Note the recorded area and its unit rather than relying only on a verbal statement.
3. Confirm the measurement with the local revenue authority
Ask the Patwari or Tehsil office which measurement standard applies to the specific land parcel. For a transaction or dispute, seek confirmation from the relevant official record or competent authority.
4. Compare the calculation with the recorded area
If the official record states an area in square metres, hectares or another standard unit, use that figure as a cross-check. Do not overwrite an official measurement with an assumed bigha conversion.
5. Consult official Rajasthan resources
- Rajasthan Land Revenue Department
- Rajasthan Land Records Rules, 1957 — updated document
- Rajasthan e-Panjiyan portal
The rules include an appendix showing land measures used in different areas of Rajasthan. This is a key reason to verify the local standard instead of relying on a single statewide bigha conversion.
Common Mistakes to Avoid
- Assuming every bigha has the same area: The unit can vary with the local convention.
- Confusing length with area: A measurement of 165 feet is a side length; 165 × 165 gives the square area.
- Mixing measurement systems: Do not use one bigha standard for the seller’s figure and another for your calculation.
- Rounding too early: Keep the exact figure during the calculation and round only the final result if necessary.
- Using a conversion as proof of ownership: Converting units does not establish ownership, possession or property boundaries.
- Relying only on a broker’s estimate: Verify the recorded area and measurement standard independently.
Related FinoBazaar Tool
If you also need to estimate the DLC value of land, use the FinoBazaar DLC Value Calculator.
The DLC calculator serves a different purpose from a unit converter. First verify the land area and the relevant local measurement standard, then use the appropriate information for a valuation estimate.
Frequently Asked Questions
1. How many square feet are in 1 pakka bigha in Rajasthan?
Under the 165-foot × 165-foot Shahjahani Jarib example, one bigha equals 27,225 square feet. Confirm the local measurement standard before applying this figure to a specific parcel.
2. What is the formula for pakka bigha to square feet conversion?
For the stated example, multiply the number of bighas by 27,225. The result is the area in square feet, provided that the same measurement standard applies.
3. How many square feet are in 5 pakka bighas?
Using 27,225 square feet per bigha, 5 bighas equal 136,125 square feet. This is an illustrative calculation, not a confirmed area for every Rajasthan locality.
4. How many square feet are in 10 pakka bighas?
Using the same measurement example, 10 bighas equal 272,250 square feet.
5. Is one pakka bigha always 27,225 square feet in Rajasthan?
No. The 27,225-square-foot figure comes from the 165-foot × 165-foot example. Rajasthan’s land-record rules describe different land measures in different areas, so verify the applicable local standard.
6. What is the difference between pakka bigha and kachha bigha?
They may refer to different traditional land-measurement conventions. The exact area depends on the applicable local standard. Confirm the dimensions before comparing the two units.
7. How can I verify bigha measurement for my village?
Check the village’s revenue and settlement records and ask the local Patwari or Tehsil office which measurement standard applies. Use official recorded area figures when available.
8. Can I use this conversion for property registration?
Use it only as a preliminary calculation after confirming the applicable measurement standard. For registration, rely on the required property documents, official area and instructions from the registration authority.
9. Does square-foot conversion confirm a plot’s boundaries?
No. It converts area units only. It does not prove ownership, possession, boundaries or the legal status of a plot.
Conclusion
For the commonly cited 165-foot × 165-foot Shahjahani Jarib example, 1 bigha equals 27,225 square feet. The formula is simple: multiply the number of bighas by 27,225.
However, Rajasthan has used different land-measurement conventions across areas. Before buying, selling, dividing or registering land, verify the relevant local standard and compare the result with official revenue records. For a land valuation estimate, you can also visit the FinoBazaar DLC Value Calculator.
Disclaimer: This article provides general information about land-area conversion. The stated conversion is based on a specific measurement example and may not apply to every location. Confirm the applicable local standard and official land records before making legal or financial decisions.