Land share calculator

Last updated

Frequently asked questions

What is a land share calculator?

It works out how much land each co-owner (khatedar) holds from the share written against their name in the land record — for example 1/10 or 9/286 — and shows that area in hectare, acre, square metre, square foot, gaj and, where the size is recorded for the place, bigha, biswa and biswansi.

How do I calculate land share from the jamabandi?

Multiply the total area of the khata (or of the khasra) by the person's share: area of the person = total area × numerator ÷ denominator. If a person has more than one entry, add their fractions first. Enter the total area and each share exactly as written, and the calculator does this for everyone at once.

How is a 1/10 land share calculated?

Divide the total by 10. Of 1 hectare, a 1/10 share is 0.1 hectare = 1,000 square metres; of 25 bigha it is 2.5 bigha. (1,000 m² of 10,000 m²; 10% of the land.)

How is a 9/286 land share calculated?

Multiply the total by 9 and divide by 286. Of 1 hectare (10,000 m²), 9/286 is 90,000 ÷ 286 ≈ 314.69 m², about 3.1469% of the land. The calculator keeps the fraction exact and rounds only the figure it shows.

Can different khatedars have different shares?

Yes. Each person's share is entered separately and is never assumed equal. One person may hold 125/286 and another 9/286 in the same khata.

Can I calculate shares with different denominators?

Yes. Shares such as 1/3, 7/10 and 9/286 are added exactly over a common denominator, so the total and the remaining share are exact fractions, not rounded decimals.

How do I calculate land share in bigha?

Enter the total in bigha and choose the place. Each person's area is shown in bigha straight from their share. Conversion to hectare, biswa or biswansi needs the size of a bigha recorded for that district or tehsil; the size differs across Rajasthan and other states, so where it is not recorded the page says "Local conversion unavailable" instead of assuming one.

How do I calculate land share in hectare?

Enter the total in hectare (as in most jamabandi copies) and each share; every person's area is shown in hectare and in the other units. 1 hectare = 10,000 m² = about 2.471 acres.

What happens when the total share is less than 100%?

The calculator shows the remaining fraction, its percentage and its area, and says that some share is unallocated or not entered. Nothing is shared out: each person still gets exactly their recorded share. Check whether a khatedar is missing.

What happens when the total share exceeds 100%?

The calculator shows the excess fraction, percentage and area and asks you to verify the jamabandi entries. It never reduces anyone's share to make the total 100%; a total above 100% usually means a wrong, repeated or overlapping entry.

Can I calculate multiple khasras separately?

Yes. Choose "khasra-wise", enter each khasra with its own area, and enter each share against the khasra it belongs to. Each khasra is reconciled on its own; a person's total area is the sum of their areas in each khasra. An account-level share is never applied to every khasra unless you choose that.

Can I download the calculation report?

Yes: an Excel file, a printable report (use "Save as PDF" in the print window for a PDF), a statement for one khatedar, a khasra-wise statement and a reconciliation report. Reports are made from the form and are not stored on Finobazaar; signed-in users can save the calculation to their account.

Is this calculation a legal land partition?

No. It is arithmetic on the figures you enter. It does not establish ownership, verify title or divide land on the ground. A partition is done by the revenue authority or a court; check rights against the official records and take legal advice.

How accurate are local bigha and biswa conversions?

They are only as reliable as the recorded size for the place. Finobazaar uses a bigha, biswa or biswansi size only when it is recorded for that state, district or tehsil with its source and date, and shows that source with the result. If your record uses a different local measure, rely on the record.

Choose your location